Skip to content

All 50 states

Book an inspection
Sabine Crest Roofing

Roof repair

Chimney flashing repair

Chimney flashing repair replaces the metal that seals the joint between the roof and the chimney: step flashing woven into the shingles, counter flashing set into the mortar joints, and a cricket on the uphill side of wide chimneys. Most chimney leaks are flashing failures, not brick failures.

Referral service. By calling, you agree your call may be recorded and connected to an independent roofing contractor in your area, who may call or text you back about your request, including by automated means. Consent is not a condition of purchase. Msg & data rates may apply.

Typical time
Usually one day, including re-shingling around the chimney.
Repair or replace
Replace failed flashing; resealing only suits flashing that is sound and correctly installed.

Call about chimney flashing repair

(833) 549-4913

Referral service. By calling, you agree your call may be recorded and connected to an independent roofing contractor in your area, who may call or text you back about your request, including by automated means. Consent is not a condition of purchase. Msg & data rates may apply.

Mention chimney flashing and your ZIP.

A chimney moves differently from the roof around it, and water piles up against its uphill side. Flashing that was face-nailed, sealed only with caulk, or never set into the mortar joints usually fails first, and the leak shows up on the ceiling or wall beside the fireplace.

A proper repair removes the shingles along the chimney, installs new step flashing one piece per course, cuts a reglet into the mortar for counter flashing, and adds a cricket on the high side of wide chimneys so water is diverted around it. Cracked crowns or spalling brick are noted separately for a mason.

Chimney Flashing Repair at a glance

What it is
Chimney flashing repair replaces the metal that seals the joint between the roof and the chimney: step flashing woven into the shingles, counter flashing set into the mortar joints, and a cricket on the uphill side of wide chimneys.
Service category
Roof Repair

Signs you need chimney flashing help

Quick answers

Chimney Flashing Repair: the short version

How long chimney flashing repair takes

Usually one day, including re-shingling around the chimney.

When chimney flashing can wait, and when it can't

Soon — chimney leaks soak framing and insulation out of sight.

Fix or replace chimney flashing?

Replace failed flashing; resealing only suits flashing that is sound and correctly installed.

Why chimney flashing happens

Caulk-only installs, missing counter flashing, rust, and water piling up behind wide chimneys.

The work

What the roofer does

  1. 1

    Find the actual entry point

    Check the flashing, crown, cap and brick, since a chimney can leak from the top as well as at the roof line.

  2. 2

    Remove old flashing

    Lift surrounding shingles and pull failed step, counter and apron flashing.

  3. 3

    Install new flashing

    Step flashing per course, counter flashing let into the mortar joints, and a cricket where the chimney is wide.

  4. 4

    Seal and re-shingle

    Reset shingles, seal the reglet, and photograph the finished work.

Before you call

Safe first steps: chimney flashing

Safe to do yourself

  • •Note whether the leak appears only with wind-driven rain or snow
  • •Photograph stains and the chimney from the ground
  • •Check the attic around the chimney for wet wood

Stop and get professional help if

  • •Don't keep adding caulk — it fails within a season or two and hides the real problem
  • •Don't climb onto the roof to reach the chimney

Check coverage near you

Use your location or ZIP code to see whether chimney flashing repair is covered where you are, and the nearest service area.

Location is only used to find the service area nearest you. It stays on your device and isn't stored.

Happening right now? 24-hour emergency service is the faster route than a scheduled visit.

Chimney Flashing Repair: common questions

Why does my chimney leak only in heavy rain?

Heavy or wind-driven rain overwhelms flashing that is loose, short or not set into the mortar. In light rain water runs past; in a downpour it backs up behind the chimney and finds the gap.

Can't the roofer just reseal the flashing?

Sealant can buy time, but flashing that was installed wrong or has rusted through needs replacement. Step and counter flashing work because they overlap, not because they are glued.

What is a chimney cricket?

A small peaked roof built on the uphill side of a chimney that splits water around it. Many codes call for one on chimneys wider than 30 inches.

Service area

Chimney Flashing Repair in all 50 states

Call about chimney flashing

Caulk-only installs, missing counter flashing, rust, and water piling up behind wide chimneys.

Referral service. By calling, you agree your call may be recorded and connected to an independent roofing contractor in your area, who may call or text you back about your request, including by automated means. Consent is not a condition of purchase. Msg & data rates may apply.

Call nowBook an inspection
Call (833) 549-4913